Bambu Lab Hotend for P1S, P1P & X1C (FAH001-N-1 / FAH003-N-1 / FAH004-N-1 / FAH005-N-1)

Genuine Bambu Lab hotend for the P1S, P1P and X1C. Each hotend comes pre-assembled (nozzle, heatbreak and heatsink) so swapping nozzle sizes or replacing a worn hotend is a quick job – no nozzle threading or heatbreak alignment to worry about. Your printer's existing heater and thermistor are reused.

• Pre-assembled hotend – nozzle, heatbreak and heatsink in one unit
• Hardened Steel nozzle (0.4 / 0.6 / 0.8mm) – wear-resistant, required for abrasive and fibre-filled filaments (PLA-CF, PETG-CF, PA-CF etc.)
• Stainless Steel nozzle (0.2mm) – fine-detail printing with standard filaments
• Max printing temperature 320°C
• In the box: hotend, 2x M3-14 step screws, silicone sock, thermal grease, retaining clip
• Keep a spare on hand to minimise downtime

Compatibility: P1S, P1P, X1C

Note: this is the hotend only. The heater, thermistor and fan from your existing hotend are reused. If you need the version with heater and thermistor included, look for the Bambu Lab Complete Hotend.

Bambu Lab part numbers: FAH004-N-1 (0.2mm Stainless), FAH001-N-1 (0.4mm Hardened), FAH005-N-1 (0.6mm Hardened), FAH003-N-1 (0.8mm Hardened)