Fluorescent PLA 3D Printing Filament - 1kg x 1.75mm

3D META’s PLA 3D printing filament is produced with high quality polylactic acid (PLA) material. Our PLA fluorescent 3D printer filament has exceptional bed and layer adhesion, does not warp or crack, has excellent dimensional stability and is manufactured under strict QA standards. Suitable for most FDM printers 3D META’s PLA filament is also 100% biodegradable as well as being FDA food safety approved. All up our PLA filament gives users an easy to print, consistent and reliable, high quality filament that you can use with confidence.

Key Features:

• Manufactured with high quality materials.
• Suitable for most FDM printers.
• Exceptional bed and layer adhesion.
• No warping or cracking.
• 100% Biodegradable.
• FDA food safety approved.
• Manufactured under strict QA procedures.
• Consistent, reliable, easy to print with filament.

 

PLA Printing Parameters:

Nozzle Temperature	190℃ - 220℃
Bed Temperature	25℃ - 60℃
Print Surface	Most print surfaces ie. Glass, Meta Flex etc
Model Cooling Fan	50% - 100%
Layer	0.12mm - 0.3mm
Printing Speed	60mm/s - 90mm/s
Idle Speed	60mm/s - 120mm/s
Retraction Distance	1mm - 2mm
Retraction Speed	30mm/s - 50mm/s
Supporting Materials	Itself, PVA

 

PLA Technical Specifications:

Physical Properties	Test
Density	ISO 1183	1.25g/cm3 - 1.26g/cm3
MFR (250℃/2.16Kg)	ISO 1133	4g/10min - 8g/10min
Moisture Absorption (23℃/24h)	ISO 62	＜0.3%
Mechanical Properties
Tensile Strength	ISO 527	45Mpa - 49Mpa
Elongation at Break	ISO 527	13.5% - 15.5%
Flexural Modulus	ISO 527	1000Mpa - 1100Mpa
Flexural Strength	ISO178	69Mpa - 75Mpa
Impact Strength	ISO180	4.5 - 5 KJ/m2
Thermodynamic Properties
HDT@ 0.455MPa (66 psi)	ISO75	53℃
Continuous Use Temperature	IEC 60216	50℃
Weights and Dimensions
Spool Dimensions	Outside Diameter: 200mm Width: 65mm Internal Hub Diameter: 52mm
Spool Weight (without filament)	150g
Spool Weight (with filament)	1.15kg
Package Dimensions (LxWxH)	210mm x 210mm x 75mm
Package Weight	1.3kg

 

Applications:

Due to its easy printability and wide range of colours, PLA can be used for a range of applications. Most commonly PLA products are used for decorative / ornamental pieces, cosplay, and product prototyping.

One downside to PLA filaments are that they have low UV resistant, meaning that if your printed piece is going to be outside it will weaken and fade overtime due to UV exposure. Good filaments for outdoor use are PETG and ASA.

 

Storage and Drying:

To prevent moisture absorption, it is recommended to keep your filament in a cool, dark, dry area, preferable sealed in an airtight bag.

Filament can be dried with various methods including a dedicated filament drying machine, food dehydrator, oven, or even your printer if it’s fully enclosed. For PLA and PLA+ filaments we recommend a drying temperature of 40℃ - 45℃ for a minimum of 4 – 6 hours.

 

Why choose 3D META 3D printing filaments?

High quality materials – All 3D META filaments are made for high quality materials.

Strict manufacturing procedures and QA standards – All 3D META filaments are produced, checked, and tested to the highest standards. Ensuring filament is consistent and reliable roll after roll.

Tried and tested – All 3D META filaments are tried and tested inhouse before release, giving you the confidence that new filament we release or a filament you haven’t tried before will work as it should.

Committed to growth – At 3D META we are committed to growing and expanding our range of filaments, be it with new materials or exciting new colours, we are always listening to our customers and trying new combinations.