{"product_id":"bambu-lab-ams-2-pro","title":"Bambu Lab AMS 2 Pro Automatic Material System with Filament Drying (SA007)","description":"\u003ch2\u003eBambu Lab AMS 2 Pro – Automatic Material System with 65°C Filament Drying\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab AMS 2 Pro is the second-generation four-spool Automatic Material System. It keeps the multi-colour and multi-material printing of the original AMS and adds what owners asked for most: active filament drying up to 65 °C, airtight storage, and a brushless PMSM feeding motor that changes filament 60% faster – saving around ten minutes for every hundred colour changes. Load four spools, let RFID identify Bambu filament automatically, and print.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eActive air vent filament drying up to 65 °C – dries 30% faster than sealed heating\u003c\/li\u003e\n\u003cli\u003eAirtight filament storage with desiccant keeps PLA, PETG and ABS printing cleanly\u003c\/li\u003e\n\u003cli\u003ePMSM brushless feeding motor – 60% faster filament changes than the original AMS\u003c\/li\u003e\n\u003cli\u003eRFID filament sync for Bambu spools; works with third-party spools too\u003c\/li\u003e\n\u003cli\u003eTool-free PTFE tube access and a ceramic inlet for abrasive filaments\u003c\/li\u003e\n\u003cli\u003eChain up to 4 AMS 2 Pro (plus AMS HT units) for up to 24 filaments on X2D and H2 Series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 spools, 50–68 mm wide, 197–202 mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax drying temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, PET, PA, PC, dried PVA\/BVOH, PP, POM, HIPS, Bambu PLA-CF \/ PAHT-CF \/ PETG-CF, TPU for AMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTPE, generic TPU, damp PVA\/BVOH, Bambu PET-CF \/ TPU 95A and other CF\/GF filaments (use the AMS HT bypass or external spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e372 × 280 × 226 mm, 2.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 V 4 A via printer or Switching Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAMS 2 Pro\u003c\/li\u003e\n\u003cli\u003eDesiccant\u003c\/li\u003e\n\u003cli\u003ePTFE tubes (2 × 185 mm, 2 × 225 mm, 1 × 900 mm)\u003c\/li\u003e\n\u003cli\u003eBambu Bus 6-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP2S, X2D, H2 Series:\u003c\/strong\u003e connect directly. The printer can power drying for one AMS 2 Pro (on the P2S, while idle); add a Switching Adapter to dry more than one unit or dry during printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP1 \/ X1 Series:\u003c\/strong\u003e connect directly for printing; a Switching Adapter (24 V 4 A, sold separately) is required to use filament drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA1 \/ A1 Mini:\u003c\/strong\u003e requires the AMS Hub – A1 Series (SA013).\u003c\/li\u003e\n\u003cli\u003eUp to 4 AMS units per printer via the AMS Hub (P1\/X1) or 4-in-1 PTFE Adapter (P2S\/X2D\/H2).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAMS 2 Pro or AMS HT?\u003c\/strong\u003e\u003cbr\u003eThe AMS 2 Pro holds four spools and dries at 65 °C – the everyday choice for PLA, PETG and ABS. The AMS HT holds one spool, dries at 85 °C and has a bypass outlet for TPU and CF filaments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it dry filament on its own?\u003c\/strong\u003e\u003cbr\u003eNo. It must be connected to a powered-on printer; drying power comes from the printer or a Switching Adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it work with the original AMS Hub?\u003c\/strong\u003e\u003cbr\u003eYes on P1 and X1 Series. The AMS Hub is not compatible with the P2S or X2D.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54687261688092,"sku":"BL-AMS-2-PRO","price":529.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-ams-2-pro-sa007.png?v=1791882286","url":"https:\/\/www.3dmeta.com.au\/products\/bambu-lab-ams-2-pro","provider":"3D META","version":"1.0","type":"link"}