{"title":"Bambu Lab","description":"\u003cp\u003eShop the full Bambu Lab range at 3D META — A1, A1 Mini, P1S, P2S and X2D 3D printers, AMS 2 Pro, AMS Lite and AMS HT multi-material systems, plus genuine hotends, nozzles, AMS hubs, PTFE adapters and air filters. Australian stock, Australian support, shipped from Melbourne.\u003c\/p\u003e","products":[{"product_id":"bambu-lab-p2s-combo-3d-printer-enclosed-ams-2-pro","title":"Bambu Lab P2S Combo 3D Printer with AMS 2 Pro","description":"\u003ch2\u003eBambu Lab P2S Combo 3D Printer with AMS 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab P2S is the refined successor to the best-selling P1S: a fully enclosed 256mm CoreXY printer with a 5-inch touchscreen, a PMSM servo extruder, AI error detection and 600mm\/s print speeds. The P2S Combo pairs it with the AMS 2 Pro for four-colour printing and 65°C active filament drying, which makes it the most complete enclosed printer in Bambu's P Series for home, workshop and small-business use.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFully enclosed chamber with activated carbon filter – ready for ABS, ASA, PC and PA as well as PLA and PETG\u003c\/li\u003e\n\u003cli\u003ePMSM servo extruder with up to 8.5kg of extrusion force (70% more than the P1S) and real-time clog and grind detection\u003c\/li\u003e\n\u003cli\u003eAI error detection on a 2 TOPS NPU: start check, spaghetti, nozzle clumping and purge chute jam\u003c\/li\u003e\n\u003cli\u003e5-inch touchscreen with Bambu's refreshed interface and 1080p live view camera\u003c\/li\u003e\n\u003cli\u003e30-second quick-swap hotend – one clip, no wiring to disconnect\u003c\/li\u003e\n\u003cli\u003eAuto flow dynamics calibration, auto bed levelling and vibration compensation\u003c\/li\u003e\n\u003cli\u003eAdaptive airflow draws cool air from outside the chamber for crisper PLA and PETG overhangs\u003c\/li\u003e\n\u003cli\u003eAMS 2 Pro included: four slots, RFID filament sync, 65°C active-vent drying and airtight storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 °C (hardened steel 0.4mm nozzle included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax bed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e110 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax volumetric flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFully enclosed, passively regulated (no active heater)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFiltration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eGranulated coconut-shell activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 854 × 480 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1920 × 1080 @ 30fps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual-band Wi-Fi, Bambu Handy app, Bambu Studio, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, TPU, PC, PA, PVA, PET and CF\/GF variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e392 × 406 × 478 mm, 15 kg (Combo 16.4 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200–240 V AC, 1200 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab P2S 3D printer with textured PEI plate\u003c\/li\u003e\n\u003cli\u003eAMS 2 Pro with desiccant\u003c\/li\u003e\n\u003cli\u003eP2S filament buffer (pre-installed)\u003c\/li\u003e\n\u003cli\u003eSpool holder, PTFE tubes, Bambu Bus cable, power cord\u003c\/li\u003e\n\u003cli\u003eToolbox: spare silicone sock, filament cutter, unclogging pin, scraper, Allen keys, lubricants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the P2S have a heated chamber?\u003c\/strong\u003e\u003cbr\u003eNo. The chamber is fully enclosed and regulates temperature passively with an automatic flap – Bambu describes it as “50°C chamber ready” for engineering filaments. For active 65°C chamber heating see the \u003ca href=\"\/products\/bambu-lab-x2d-combo-3d-printer-with-ams-2-pro\"\u003eX2D Combo\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many AMS units can I connect?\u003c\/strong\u003e\u003cbr\u003eUp to four AMS 2 Pro plus four AMS HT (20 slots). Three or more AMS units need the 4-in-1 PTFE Adapter. The older AMS Hub is \u003cem\u003enot\u003c\/em\u003e compatible with the P2S.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I upgrade my P1S to a P2S?\u003c\/strong\u003e\u003cbr\u003eNo – the P2S is a new platform. The P1S cannot be upgraded, though hotends and silicone socks differ between the two so check compatibility before buying spares.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs filament included?\u003c\/strong\u003e\u003cbr\u003eNo. Filament is sold separately unless stated in the bundle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54198796222748,"sku":"BL-P2S-COMBO-AMS2","price":1149.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-p2s-combo.png?v=1791803950"},{"product_id":"bambu-lab-a1-combo-3d-printer","title":"Bambu Lab A1 Combo 3D Printer with AMS Lite","description":"\u003ch2\u003eBambu Lab A1 Combo 3D Printer with AMS Lite\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab A1 Combo is the easiest way into multi-colour 3D printing. It pairs the A1 – a 256mm open-frame printer that calibrates itself completely – with the AMS Lite, a four-spool automatic material system built for the A1 Series. Unbox it, run the guided setup and you're printing four-colour models from MakerWorld in under half an hour.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFull-auto calibration – bed levelling, Z-offset, vibration resonance and nozzle pressure, no manual tuning\u003c\/li\u003e\n\u003cli\u003eActive flow rate compensation for smooth surfaces and sharp corners\u003c\/li\u003e\n\u003cli\u003e500 mm\/s print speed with 10,000 mm\/s² acceleration\u003c\/li\u003e\n\u003cli\u003eOne-clip quick-swap hotend – change nozzle sizes in seconds\u003c\/li\u003e\n\u003cli\u003e49 dB whisper-quiet operation with active motor noise cancelling\u003c\/li\u003e\n\u003cli\u003e3.5-inch touchscreen, low-frame-rate 1080p camera for timelapses, one-click printing from MakerWorld\u003c\/li\u003e\n\u003cli\u003eAMS Lite included: four spools, RFID filament sync, automatic filament backup and spring-loaded spool holders that grip cardboard spools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 °C (stainless steel 0.4mm nozzle included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax bed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax volumetric flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen-frame bed-slinger (no enclosure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5-inch touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 GHz Wi-Fi, Bambu Handy app, Bambu Studio, microSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNoise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e49 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdeal filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA (ABS\/ASA not recommended on an open frame)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e385 × 410 × 430 mm, 8.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 V AC, 1300 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAMS Lite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 slots, 397 × 208 × 342 mm, 1.6 kg, no drying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab A1 3D printer with textured PEI plate\u003c\/li\u003e\n\u003cli\u003eAMS Lite body, stand and 4 rotary spool holders\u003c\/li\u003e\n\u003cli\u003eSpool holder, purge wiper, PTFE tubes, 20 g filament samples\u003c\/li\u003e\n\u003cli\u003eAllen keys, scraper, lubricants, spare filament cutter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCan the A1 use a regular AMS or AMS 2 Pro?\u003c\/strong\u003e\u003cbr\u003eOnly through the AMS Hub – A1 Series (SA013). Without it the A1 supports a single AMS Lite (4 colours). The AMS Lite cannot be mixed with other AMS types.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I print ABS or ASA?\u003c\/strong\u003e\u003cbr\u003eBambu doesn't recommend it – the A1 is open-frame and the bed tops out at 100 °C. For engineering filaments choose the \u003ca href=\"\/products\/bambu-lab-p2s-combo-3d-printer-enclosed-ams-2-pro\"\u003eP2S Combo\u003c\/a\u003e or \u003ca href=\"\/products\/bambu-lab-p1s-combo-3d-printer-with-ams\"\u003eP1S Combo\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eA1 or A1 Mini?\u003c\/strong\u003e\u003cbr\u003eSame features, different size: the \u003ca href=\"\/products\/bambu-lab-a1-mini-combo-3d-printer-with-ams-lite\"\u003eA1 Mini Combo\u003c\/a\u003e has a 180mm bed and 80 °C bed limit. Choose the A1 for helmets, larger props and PETG.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the printer-only version available?\u003c\/strong\u003e\u003cbr\u003eYes – see the \u003ca href=\"\/products\/bambu-lab-a1-3d-printer\"\u003eBambu Lab A1 3D Printer\u003c\/a\u003e without AMS Lite.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54198805070108,"sku":"BL-A1-COMBO","price":649.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-a1-combo.png?v=1791803956"},{"product_id":"bambu-lab-a1-mini-combo-3d-printer-with-ams-lite","title":"Bambu Lab A1 Mini Combo 3D Printer with AMS Lite","description":"\u003ch2\u003eBambu Lab A1 Mini Combo 3D Printer with AMS Lite\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab A1 Mini Combo is the most popular way to start 3D printing in Australia, and for good reason: a compact 180mm printer that sets itself up in twenty minutes, paired with the AMS Lite for four-colour prints straight out of the box. It is quiet enough for a bedroom desk, draws only 150 W, and prints a Benchy in 14 minutes.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePre-assembled, pre-squared and pre-tuned – about 20 minutes from box to first print\u003c\/li\u003e\n\u003cli\u003eFull-auto calibration – bed levelling, Z-offset, vibration resonance and nozzle pressure\u003c\/li\u003e\n\u003cli\u003eActive flow rate compensation and 500 mm\/s print speed\u003c\/li\u003e\n\u003cli\u003eOne-clip quick-swap hotend\u003c\/li\u003e\n\u003cli\u003e49 dB whisper-quiet operation with active motor noise cancelling\u003c\/li\u003e\n\u003cli\u003e2.4-inch touchscreen, timelapse camera, one-click printing from MakerWorld\u003c\/li\u003e\n\u003cli\u003eAMS Lite included: four spools, RFID filament sync, automatic filament backup and spool holders that suit cardboard spools\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e180 × 180 × 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 °C (stainless steel 0.4mm nozzle included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax bed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax volumetric flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen-frame bed-slinger (no enclosure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4-inch touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 GHz Wi-Fi, Bambu Handy app, Bambu Studio, microSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNoise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e49 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdeal filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e347 × 315 × 365 mm, 5.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 V AC, 150 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAMS Lite\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 slots, 397 × 208 × 342 mm, 1.6 kg, no drying\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab A1 Mini with textured PEI plate\u003c\/li\u003e\n\u003cli\u003eAMS Lite body, stand and 4 rotary spool holders\u003c\/li\u003e\n\u003cli\u003eSpool holder, purge wiper, PTFE tubes, 20 g filament samples, accessory box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCan the A1 Mini use a regular AMS?\u003c\/strong\u003e\u003cbr\u003eOnly via the AMS Hub – A1 Series (SA013). On its own the A1 Mini supports a single AMS Lite (4 colours).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat can't it print?\u003c\/strong\u003e\u003cbr\u003eABS, ASA, PC and PA – the bed is limited to 80 °C and there's no enclosure. PLA, PETG, TPU and PVA all print well.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs 180mm big enough?\u003c\/strong\u003e\u003cbr\u003eFor miniatures, desk accessories, toys, organisers and most MakerWorld models, yes. If you want helmets or large props, step up to the \u003ca href=\"\/products\/bambu-lab-a1-combo-3d-printer\"\u003eA1 Combo\u003c\/a\u003e with its 256mm bed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the printer-only version available?\u003c\/strong\u003e\u003cbr\u003eYes – see the \u003ca href=\"\/products\/bambu-lab-a1-mini-3d-printer\"\u003eBambu Lab A1 Mini 3D Printer\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54198861463836,"sku":"BL-A1-MINI-COMBO","price":529.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-a1-mini-combo.png?v=1791803962"},{"product_id":"bambu-lab-a1-3d-printer","title":"Bambu Lab A1 3D Printer","description":"\u003ch2\u003eBambu Lab A1 3D Printer\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab A1 brings Bambu's full-auto calibration, 500 mm\/s speed and whisper-quiet motors to an open-frame 256mm printer at an entry-level price. Nothing needs tuning by hand: bed levelling, Z-offset, resonance and flow are all measured by the printer itself, so first-layer problems and ringing are handled before you press print. This is the printer-only version – add an AMS Lite later or choose the \u003ca href=\"\/products\/bambu-lab-a1-combo-3d-printer\"\u003eA1 Combo\u003c\/a\u003e for four-colour printing out of the box.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFull-auto calibration – bed levelling, Z-offset, vibration resonance and nozzle pressure, no manual tuning\u003c\/li\u003e\n\u003cli\u003eActive flow rate compensation for smooth surfaces and sharp corners\u003c\/li\u003e\n\u003cli\u003e500 mm\/s print speed with 10,000 mm\/s² acceleration\u003c\/li\u003e\n\u003cli\u003eOne-clip quick-swap hotend – change nozzle sizes in seconds\u003c\/li\u003e\n\u003cli\u003e49 dB whisper-quiet operation with active motor noise cancelling\u003c\/li\u003e\n\u003cli\u003e3.5-inch touchscreen, low-frame-rate 1080p camera for timelapses, one-click printing from MakerWorld\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFirst-time printers who want results without a learning curve\u003c\/li\u003e\n\u003cli\u003eMakers who need a 256mm bed – helmets, cosplay, large single-piece props\u003c\/li\u003e\n\u003cli\u003eClassrooms and shared spaces where 49 dB operation matters\u003c\/li\u003e\n\u003cli\u003eAnyone who plans to add multi-colour printing later with the AMS Lite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 °C (stainless steel 0.4mm nozzle included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax bed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax volumetric flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen-frame bed-slinger (no enclosure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3.5-inch touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 GHz Wi-Fi, Bambu Handy app, Bambu Studio, microSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNoise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e49 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdeal filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA (ABS\/ASA not recommended on an open frame)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e385 × 410 × 430 mm, 8.3 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 V AC, 1300 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab A1 3D printer with textured PEI plate\u003c\/li\u003e\n\u003cli\u003eSpool holder, purge wiper, PTFE tube, 20 g filament samples\u003c\/li\u003e\n\u003cli\u003eAllen keys, scraper, lubricants, 32 GB microSD (pre-installed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add multi-colour later?\u003c\/strong\u003e\u003cbr\u003eYes. The A1 accepts one AMS Lite (4 colours), or an AMS \/ AMS 2 Pro \/ AMS HT via the AMS Hub – A1 Series (SA013).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich nozzles fit?\u003c\/strong\u003e\u003cbr\u003eA1 Series quick-swap hotends in 0.2mm stainless and 0.4\/0.6\/0.8mm hardened steel. Use hardened steel for carbon- or glass-fibre filaments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eShould I enclose it?\u003c\/strong\u003e\u003cbr\u003eBambu doesn't recommend enclosing the A1. For ABS, ASA, PC or PA choose an enclosed printer such as the \u003ca href=\"\/products\/bambu-lab-p2s-combo-3d-printer-enclosed-ams-2-pro\"\u003eP2S\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54198894690588,"sku":"BL-A1","price":429.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-a1.png?v=1791803969"},{"product_id":"bambu-lab-a1-mini-3d-printer","title":"Bambu Lab A1 Mini 3D Printer","description":"\u003ch2\u003eBambu Lab A1 Mini 3D Printer\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab A1 Mini is the printer we recommend most often to beginners. It arrives assembled and tuned, calibrates itself before every print, runs at 49 dB and fits on a small desk – yet it prints at the same 500 mm\/s speeds and with the same surface quality as Bambu's larger machines. This is the printer-only version; the \u003ca href=\"\/products\/bambu-lab-a1-mini-combo-3d-printer-with-ams-lite\"\u003eA1 Mini Combo\u003c\/a\u003e adds the AMS Lite for four-colour printing.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePre-assembled, pre-squared and pre-tuned – about 20 minutes from box to first print\u003c\/li\u003e\n\u003cli\u003eFull-auto calibration – bed levelling, Z-offset, vibration resonance and nozzle pressure\u003c\/li\u003e\n\u003cli\u003eActive flow rate compensation and 500 mm\/s print speed\u003c\/li\u003e\n\u003cli\u003eOne-clip quick-swap hotend\u003c\/li\u003e\n\u003cli\u003e49 dB whisper-quiet operation with active motor noise cancelling\u003c\/li\u003e\n\u003cli\u003e2.4-inch touchscreen, timelapse camera, one-click printing from MakerWorld\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWho It's For\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFirst printers for teens, students and classrooms\u003c\/li\u003e\n\u003cli\u003eMiniatures, tabletop terrain, desk accessories and small functional parts\u003c\/li\u003e\n\u003cli\u003eSmall apartments and shared spaces – 347mm wide and near-silent\u003c\/li\u003e\n\u003cli\u003eAnyone who wants to add four-colour printing later with the AMS Lite\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e180 × 180 × 180 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e10,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 °C (stainless steel 0.4mm nozzle included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax bed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e80 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax volumetric flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e28 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrame\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOpen-frame bed-slinger (no enclosure)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4-inch touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.4 GHz Wi-Fi, Bambu Handy app, Bambu Studio, microSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNoise\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e49 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdeal filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e347 × 315 × 365 mm, 5.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 V AC, 150 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab A1 Mini with textured PEI plate\u003c\/li\u003e\n\u003cli\u003eSpool holder, purge wiper, PTFE tube, 20 g filament samples, accessory box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCan I add multi-colour later?\u003c\/strong\u003e\u003cbr\u003eYes – add an AMS Lite at any time (4 colours), or an AMS \/ AMS 2 Pro \/ AMS HT via the AMS Hub – A1 Series (SA013).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich nozzles fit?\u003c\/strong\u003e\u003cbr\u003eA1 Series quick-swap hotends in 0.2mm stainless and 0.4\/0.6\/0.8mm hardened steel – the same hotends as the A1.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it print PETG?\u003c\/strong\u003e\u003cbr\u003eYes. PETG prints well on the textured PEI plate within the 80 °C bed limit; ABS and ASA are not recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54198918054172,"sku":"BL-A1-MINI","price":319.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-a1-mini.png?v=1791803976"},{"product_id":"bambu-lab-x2d-combo-3d-printer-with-ams-2-pro","title":"Bambu Lab X2D Combo 3D Printer with AMS 2 Pro","description":"\u003ch2\u003eBambu Lab X2D Combo Dual-Nozzle 3D Printer with AMS 2 Pro\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab X2D brings dual-nozzle printing to a 256mm desktop format. The main nozzle prints the part while the auxiliary nozzle handles support material or a second colour, so multi-colour prints finish faster with far less purge waste and soluble or break-away supports come off cleanly. Add a 65°C actively heated chamber, 300 °C hotends, three-stage HEPA filtration and 1000 mm\/s speeds, and the X2D Combo – bundled with the AMS 2 Pro – is the most capable enclosed printer under the H2 Series.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDual-nozzle printing – main PMSM servo extruder plus an auxiliary extruder for supports or a second material\u003c\/li\u003e\n\u003cli\u003e65 °C active chamber heating for warp-free ABS, ASA, PC, PA and fibre-filled engineering filaments\u003c\/li\u003e\n\u003cli\u003e300 °C hardened steel hotends, tool-free quick swap, interchangeable left and right\u003c\/li\u003e\n\u003cli\u003eThree-stage filtration: G3 pre-filter, H12 HEPA and coconut-shell activated carbon – UL 2904 certified for indoor air quality\u003c\/li\u003e\n\u003cli\u003eFull filament-path AI detection across 31 sensors, 1080p live view plus a toolhead camera\u003c\/li\u003e\n\u003cli\u003e5-inch 1280 × 720 touchscreen, under 50 dB in typical use\u003c\/li\u003e\n\u003cli\u003eAMS 2 Pro included: four slots, RFID sync, 65 °C active-vent drying, airtight storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 260 mm (main nozzle); 235.5 × 256 × 256 mm dual-nozzle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1000 mm\/s (main nozzle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax bed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEnclosed, active heating up to 65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax volumetric flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e40 mm³\/s (65 mm³\/s with high-flow hotend)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFiltration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eG3 pre-filter + H12 HEPA + activated carbon, plus external exhaust fan\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5-inch 1280 × 720 touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCameras\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1080p live view + 1600 × 1200 toolhead camera\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDual-band Wi-Fi, Bambu Handy app, Bambu Studio, USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax AMS\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 × AMS 2 Pro + 8 × AMS HT (24 slots)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e392 × 406 × 478 mm, 16.25 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAustralian 200–240 V model, 1600 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab X2D with textured PEI plate and pre-installed filament buffer\u003c\/li\u003e\n\u003cli\u003eAMS 2 Pro with desiccant\u003c\/li\u003e\n\u003cli\u003eExternal exhaust fan bundle\u003c\/li\u003e\n\u003cli\u003eAuxiliary extruder, spare hotend, silicone sock, left and right filament cutters\u003c\/li\u003e\n\u003cli\u003eSpool holders, PTFE tubes, Bambu Bus cable, tools and lubricants\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eX2D or P2S?\u003c\/strong\u003e\u003cbr\u003eThe \u003ca href=\"\/products\/bambu-lab-p2s-combo-3d-printer-enclosed-ams-2-pro\"\u003eP2S\u003c\/a\u003e is a single-nozzle printer with a passive chamber. Choose the X2D for dual-nozzle support printing, active chamber heating, HEPA filtration and the 120 °C bed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDo I need a 4-in-1 PTFE adapter?\u003c\/strong\u003e\u003cbr\u003eYes when running two AMS units plus an external spool, or three or more AMS units. The X2D uses the standard 4-in-1 PTFE Adapter (FAZ013-N).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AMS Lite or AMS Hub compatible?\u003c\/strong\u003e\u003cbr\u003eNo. The X2D works with AMS, AMS 2 Pro and AMS HT; the AMS Hub and AMS Lite are not supported.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhich nozzles fit?\u003c\/strong\u003e\u003cbr\u003eP2S\/X2D\/H2 Series quick-swap hotends in hardened steel or tungsten carbide, standard or high-flow, 0.2–0.8mm.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54198946169116,"sku":"BL-X2D-COMBO","price":1349.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-x2d-combo.png?v=1791803982"},{"product_id":"bambu-lab-p1s-combo-3d-printer-with-ams","title":"Bambu Lab P1S Combo 3D Printer with AMS","description":"\u003ch2\u003eBambu Lab P1S Combo 3D Printer with AMS\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab P1S is the enclosed CoreXY printer that print farms standardised on, and it remains the best-value way to print ABS, ASA and PETG reliably at 500 mm\/s. The P1S Combo adds the original four-slot AMS for multi-colour and multi-material printing. Setup takes about fifteen minutes: the printer levels its own bed and compensates for vibration, so it simply works out of the box.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFully enclosed steel-and-glass chamber with activated carbon filter for ABS, ASA, PC and PA\u003c\/li\u003e\n\u003cli\u003eCoreXY motion at up to 500 mm\/s and 20,000 mm\/s² acceleration\u003c\/li\u003e\n\u003cli\u003eAuto bed levelling, vibration compensation and pressure advance – no manual tuning\u003c\/li\u003e\n\u003cli\u003e300 °C all-metal hotend with quick-swap design (0.4mm stainless steel nozzle included)\u003c\/li\u003e\n\u003cli\u003eBuilt-in camera for remote monitoring and timelapse\u003c\/li\u003e\n\u003cli\u003eUp to 16 colours with four AMS units via the AMS Hub\u003c\/li\u003e\n\u003cli\u003eFarm-proven reliability – 15-minute setup, dual-sided textured PEI plate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e500 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax bed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax volumetric flow\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFully enclosed, passive\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFiltration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eActivated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2.7-inch screen with button control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1280 × 720 low-frame-rate, timelapse\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWi-Fi, Bluetooth, Bambu Handy app, Bambu Studio, microSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIdeal filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, TPU, PVA, PET, ABS, ASA (CF\/GF needs hardened hotend and gears)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e389 × 389 × 458 mm, 12.95 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–240 V AC, 1000 W max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eBambu Lab P1S with dual-sided textured PEI plate\u003c\/li\u003e\n\u003cli\u003eBambu Lab AMS with 4-pin and 6-pin Bambu Bus cables\u003c\/li\u003e\n\u003cli\u003e250 g Bambu PLA plus filament samples\u003c\/li\u003e\n\u003cli\u003eSpare hotend, unclogging pin, wiping pads, scrapers, Allen keys, 32 GB microSD (pre-installed)\u003c\/li\u003e\n\u003cli\u003e2 × spare filament cutters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eP1S or P2S?\u003c\/strong\u003e\u003cbr\u003eThe \u003ca href=\"\/products\/bambu-lab-p2s-combo-3d-printer-enclosed-ams-2-pro\"\u003eP2S Combo\u003c\/a\u003e adds a 5-inch touchscreen, servo extruder, AI error detection, 600 mm\/s and 1080p camera, and ships with the newer AMS 2 Pro with filament drying. The P1S is the proven, lower-cost choice – note it cannot be upgraded to a P2S.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan I print carbon-fibre filament?\u003c\/strong\u003e\u003cbr\u003eYes, after fitting a hardened steel hotend and hardened extruder gears – the stock stainless nozzle wears quickly on CF\/GF.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow do I add more AMS units?\u003c\/strong\u003e\u003cbr\u003eUp to four AMS units connect through the AMS Hub (SA002-N) for 16-colour printing. The \u003ca href=\"\/products\/bambu-lab-ams-ht-for-p1-p2-x1-and-h2-series-3d-printers\"\u003eAMS HT\u003c\/a\u003e is also supported.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the AMS included dried?\u003c\/strong\u003e\u003cbr\u003eThe original AMS stores filament with desiccant but has no active drying. The AMS 2 Pro and AMS HT add 65 °C and 85 °C active drying respectively.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54198990962972,"sku":"BL-P1S-COMBO","price":829.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-p1s-combo.png?v=1791803859"},{"product_id":"bambu-lab-ams-ht-for-p1-p2-x1-and-h2-series-3d-printers","title":"Bambu Lab AMS HT Automatic Material System with Filament Drying (SA008)","description":"\u003ch2\u003eBambu Lab AMS HT – Automatic Material System with 85°C Filament Drying\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab AMS HT is a single-spool automatic material system built for high-performance filaments. It dries at up to 85 °C with an active air vent – hot enough for nylon, polycarbonate and carbon-fibre blends – stores the spool airtight, and feeds it to the printer with a brushless servo motor and RFID sync. A bypass outlet lets you feed TPU and other filaments the standard AMS can't handle, and it chains with the AMS 2 Pro for up to 24-filament printing. It is compatible with every current Bambu Lab printer.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eActive air vent filament drying up to 85 °C with auto-rotate drying and over-temperature protection\u003c\/li\u003e\n\u003cli\u003eAirtight filament storage with status display for temperature, humidity and remaining drying time\u003c\/li\u003e\n\u003cli\u003eBrushless servo feeding motor and ceramic inlet (Vickers hardness 1200) for abrasive filaments\u003c\/li\u003e\n\u003cli\u003eRFID filament sync with Bambu spools\u003c\/li\u003e\n\u003cli\u003eBypass outlet for TPU, TPE and third-party CF\/GF filaments\u003c\/li\u003e\n\u003cli\u003eChain up to 4 × AMS 2 Pro and 8 × AMS HT for 24 filaments (X2D \/ H2 Series)\u003c\/li\u003e\n\u003cli\u003eFits every Bambu Lab printer – A1 Series via the AMS Hub – A1 Series (SA013)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 spool, 50–68 mm wide, 197–202 mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax drying temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e85 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported via feeder\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, PET, PA, PC, PVA, BVOH, PP, POM, HIPS, Bambu PLA-CF \/ PAHT-CF \/ PETG-CF, TPU for AMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVia bypass outlet\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTPU, TPE, Bambu PET-CF, TPU 95A and other CF\/GF filaments\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e114 × 280 × 245 mm, 1.21 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 V DC \/ 100–240 V AC, 150 W average (power cord included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAMS HT\u003c\/li\u003e\n\u003cli\u003eDesiccant\u003c\/li\u003e\n\u003cli\u003ePTFE tubes (2 × 263 mm, 1 × 900 mm)\u003c\/li\u003e\n\u003cli\u003eBambu Bus 6-pin cable\u003c\/li\u003e\n\u003cli\u003ePower cord\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA1 \/ A1 Mini:\u003c\/strong\u003e requires the AMS Hub – A1 Series (SA013).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP1 \/ X1 Series:\u003c\/strong\u003e for a single AMS HT you need the PTFE tube coupler (FAZ006), 4-pin cable (CAB002-N) and filament buffer (SA003). For multiple AMS units use the AMS Hub (SA002-N) instead of the buffer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP2S:\u003c\/strong\u003e up to 2 AMS units need the P2S filament buffer (SA011) and Bambu Bus cable (CAB035); 3 or more also need the 4-in-1 PTFE Adapter (FAZ013-N).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eX2D \/ H2S:\u003c\/strong\u003e more than one AMS unit needs the 4-in-1 PTFE Adapter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eH2D \/ H2C:\u003c\/strong\u003e more than two AMS units need the 4-in-1 PTFE Adapter.\u003c\/li\u003e\n\u003cli\u003eAMS HT is temporarily not compatible with the X1E.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCan the AMS HT dry filament on its own?\u003c\/strong\u003e\u003cbr\u003eNo. It must be connected by Bambu Bus cable to a powered-on printer, and uses its own power cord for the heater.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAMS HT or AMS 2 Pro?\u003c\/strong\u003e\u003cbr\u003eThe AMS 2 Pro holds four spools and dries at 65 °C – ideal for PLA, PETG and ABS. The AMS HT holds one spool, dries at 85 °C and has the bypass outlet – choose it for PA, PC, CF and TPU.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes TPU feed automatically through the bypass?\u003c\/strong\u003e\u003cbr\u003eNo. The bypass outlet is a manual feed path with no auto load or retract.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54199017079068,"sku":"BL-AMS-HT","price":299.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-ams-ht.png?v=1791803989"},{"product_id":"bambu-lab-ams-2-pro","title":"Bambu Lab AMS 2 Pro Automatic Material System with Filament Drying (SA007)","description":"\u003ch2\u003eBambu Lab AMS 2 Pro – Automatic Material System with 65°C Filament Drying\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab AMS 2 Pro is the second-generation four-spool Automatic Material System. It keeps the multi-colour and multi-material printing of the original AMS and adds what owners asked for most: active filament drying up to 65 °C, airtight storage, and a brushless PMSM feeding motor that changes filament 60% faster – saving around ten minutes for every hundred colour changes. Load four spools, let RFID identify Bambu filament automatically, and print.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eActive air vent filament drying up to 65 °C – dries 30% faster than sealed heating\u003c\/li\u003e\n\u003cli\u003eAirtight filament storage with desiccant keeps PLA, PETG and ABS printing cleanly\u003c\/li\u003e\n\u003cli\u003ePMSM brushless feeding motor – 60% faster filament changes than the original AMS\u003c\/li\u003e\n\u003cli\u003eRFID filament sync for Bambu spools; works with third-party spools too\u003c\/li\u003e\n\u003cli\u003eTool-free PTFE tube access and a ceramic inlet for abrasive filaments\u003c\/li\u003e\n\u003cli\u003eChain up to 4 AMS 2 Pro (plus AMS HT units) for up to 24 filaments on X2D and H2 Series\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 spools, 50–68 mm wide, 197–202 mm diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax drying temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e65 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ABS, ASA, PET, PA, PC, dried PVA\/BVOH, PP, POM, HIPS, Bambu PLA-CF \/ PAHT-CF \/ PETG-CF, TPU for AMS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot supported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTPE, generic TPU, damp PVA\/BVOH, Bambu PET-CF \/ TPU 95A and other CF\/GF filaments (use the AMS HT bypass or external spool)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e372 × 280 × 226 mm, 2.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24 V 4 A via printer or Switching Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAMS 2 Pro\u003c\/li\u003e\n\u003cli\u003eDesiccant\u003c\/li\u003e\n\u003cli\u003ePTFE tubes (2 × 185 mm, 2 × 225 mm, 1 × 900 mm)\u003c\/li\u003e\n\u003cli\u003eBambu Bus 6-pin cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eP2S, X2D, H2 Series:\u003c\/strong\u003e connect directly. The printer can power drying for one AMS 2 Pro (on the P2S, while idle); add a Switching Adapter to dry more than one unit or dry during printing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eP1 \/ X1 Series:\u003c\/strong\u003e connect directly for printing; a Switching Adapter (24 V 4 A, sold separately) is required to use filament drying.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA1 \/ A1 Mini:\u003c\/strong\u003e requires the AMS Hub – A1 Series (SA013).\u003c\/li\u003e\n\u003cli\u003eUp to 4 AMS units per printer via the AMS Hub (P1\/X1) or 4-in-1 PTFE Adapter (P2S\/X2D\/H2).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eAMS 2 Pro or AMS HT?\u003c\/strong\u003e\u003cbr\u003eThe AMS 2 Pro holds four spools and dries at 65 °C – the everyday choice for PLA, PETG and ABS. The AMS HT holds one spool, dries at 85 °C and has a bypass outlet for TPU and CF filaments.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCan it dry filament on its own?\u003c\/strong\u003e\u003cbr\u003eNo. It must be connected to a powered-on printer; drying power comes from the printer or a Switching Adapter.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it work with the original AMS Hub?\u003c\/strong\u003e\u003cbr\u003eYes on P1 and X1 Series. The AMS Hub is not compatible with the P2S or X2D.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54687261688092,"sku":"BL-AMS-2-PRO","price":529.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-ams-2-pro-sa007.png?v=1791882286"},{"product_id":"bambu-lab-hotend-with-tungsten-carbide-nozzle-for-p2s-x2d-h2-series","title":"Bambu Lab Tungsten Carbide Hotend for P2S, X2D \u0026 H2 Series (FAH040 \/ FAH041 \/ FAH042)","description":"\u003cp\u003eGenuine Bambu Lab Tungsten Carbide Hotend for the P2S, X2D and H2 Series. Tungsten carbide rates HRA 90 on the hardness scale against 74 for hardened steel, so this is the hotend to fit when you print abrasive fibre-filled materials – Bambu quotes around 50% longer life than hardened steel on carbon-fibre and glass-fibre filaments.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIntegrated tungsten carbide nozzle – HRA 90 hardness, built for PLA-CF, PETG-CF, PA-CF, PAHT-CF and GF blends\u003c\/li\u003e\n\u003cli\u003eAround 50% longer lifespan than hardened steel on abrasive filaments\u003c\/li\u003e\n\u003cli\u003eMax printing temperature 350°C\u003c\/li\u003e\n\u003cli\u003eTool-free quick-swap design – change hotends in seconds, no wiring to disconnect\u003c\/li\u003e\n\u003cli\u003eMax volumetric flow (0.4mm): approx. 24 mm³\/s PLA Basic, 28 mm³\/s PLA Matte, 24 mm³\/s PETG HF\u003c\/li\u003e\n\u003cli\u003eAvailable in 0.4mm, 0.6mm and 0.8mm (no 0.2mm)\u003c\/li\u003e\n\u003cli\u003eReplace when you see under-extrusion, persistent clogs or poor surface finish with abrasive materials\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e P2S, X2D, H2S, H2D (both hotends), H2D Pro, H2C (left hotend). On dual-nozzle H2 printers both nozzles must be the same size. Not compatible with P1, X1 or A1 Series.\u003c\/p\u003e\u003cp\u003eBambu Lab part numbers: FAH040 (0.4mm), FAH041 (0.6mm), FAH042 (0.8mm)\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"0.4mm","offer_id":54687857738012,"sku":"BL-HOTEND-X2D-TC-0.4","price":97.0,"currency_code":"AUD","in_stock":false},{"title":"0.6mm","offer_id":54687857770780,"sku":"BL-HOTEND-X2D-TC-0.6","price":97.0,"currency_code":"AUD","in_stock":false},{"title":"0.8mm","offer_id":54687857803548,"sku":"BL-HOTEND-X2D-TC-0.8","price":97.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-tungsten-carbide-hotend-0-4mm.png?v=1791881887"},{"product_id":"bambu-lab-high-flow-hotend-with-tungsten-carbide-nozzle-for-p2s-x2d-h2-series","title":"Bambu Lab High Flow Tungsten Carbide Hotend for P2S, X2D \u0026 H2 Series (FAH043 \/ FAH044 \/ FAH045)","description":"\u003cp\u003eGenuine Bambu Lab High Flow Tungsten Carbide Hotend for the P2S, X2D and H2 Series. The high-flow melt zone delivers up to 62.5% higher maximum volumetric speed than the standard hotend – cutting print times by up to 30% – while the HRA 90 tungsten carbide nozzle shrugs off abrasive fibre-filled filaments. The premium option for fast engineering-material printing.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh Flow design – up to 62.5% higher max volumetric speed, up to 30% shorter print times\u003c\/li\u003e\n\u003cli\u003eMax volumetric flow (0.4mm): approx. 40 mm³\/s PLA Basic, 48 mm³\/s PLA Matte, 32 mm³\/s PETG HF; 0.6 and 0.8mm approx. 40 mm³\/s\u003c\/li\u003e\n\u003cli\u003eIntegrated tungsten carbide nozzle – HRA 90 hardness, around 50% longer life than hardened steel on CF\/GF filaments\u003c\/li\u003e\n\u003cli\u003eMax printing temperature 350°C\u003c\/li\u003e\n\u003cli\u003eTool-free quick-swap design – change hotends in seconds, no wiring to disconnect\u003c\/li\u003e\n\u003cli\u003eAvailable in 0.4mm, 0.6mm and 0.8mm (no 0.2mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e P2S, X2D, H2S, H2D (both hotends), H2D Pro, H2C (left hotend). On dual-nozzle H2 printers both nozzles must be the same size. Not compatible with P1, X1 or A1 Series.\u003c\/p\u003e\u003cp\u003eBambu Lab part numbers: FAH043 (0.4mm), FAH044 (0.6mm), FAH045 (0.8mm)\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"0.4mm","offer_id":54687858295068,"sku":"BL-HOTEND-X2D-TCHF-0.4","price":147.0,"currency_code":"AUD","in_stock":false},{"title":"0.6mm","offer_id":54687858327836,"sku":"BL-HOTEND-X2D-TCHF-0.6","price":147.0,"currency_code":"AUD","in_stock":false},{"title":"0.8mm","offer_id":54687858360604,"sku":"BL-HOTEND-X2D-TCHF-0.8","price":147.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-high-flow-tungsten-carbide-hotend-0-4mm.png?v=1791881880"},{"product_id":"bambu-lab-ams-hub-for-p1s-p1p-x1c","title":"Bambu Lab AMS Hub for P1S, P1P, X1C \u0026 X1E (SA002-N)","description":"\u003cp\u003eGenuine Bambu Lab AMS Hub for the P1S, P1P, X1C and X1E. The AMS Hub replaces the filament buffer on the back of the printer and expands it from one AMS (4 slots) to as many as four AMS units – up to 16 filaments \/ colours in one print.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnect up to 4 AMS units (AMS, AMS 2 Pro or AMS HT) to one printer\u003c\/li\u003e\n\u003cli\u003eUp to 16 filament slots for multi-colour and multi-material printing\u003c\/li\u003e\n\u003cli\u003eIn the box: AMS Hub, 2x Bambu Bus 6-pin cables (1.5m), PTFE tube, 2x M3x28 screws – enough to connect a second AMS; extra cables\/PTFE needed for a third and fourth\u003c\/li\u003e\n\u003cli\u003eRequires the 4-pin Bambu Bus cable from your existing buffer (not included)\u003c\/li\u003e\n\u003cli\u003eInput 24V 3A\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e P1S, P1P, X1C, X1E. Not compatible with P2S, X2D or A1 Series (A1 Series uses the AMS Hub – A1 Series, SA013).\u003c\/p\u003e\u003cp\u003eBambu Lab part number: SA002-N\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54687858426140,"sku":"BL-AMS-HUB-P1","price":76.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-ams-hub-sa002-n.png?v=1791870979"},{"product_id":"bambu-lab-ams-hub-for-a1-a1-mini","title":"Bambu Lab AMS Hub for A1 \u0026 A1 Mini (SA013)","description":"\u003cp\u003eGenuine Bambu Lab AMS Hub – A1 Series. This hub is required to connect a standard AMS, AMS 2 Pro or AMS HT to an A1 or A1 Mini, which otherwise support only the AMS Lite. It unlocks active filament drying and airtight storage on the A1 Series, and supports up to four AMS units.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConnects AMS, AMS 2 Pro or AMS HT to the A1 and A1 Mini – up to 4 units\u003c\/li\u003e\n\u003cli\u003eUnlocks 65°C (AMS 2 Pro) or 85°C (AMS HT) filament drying and sealed storage on A1 Series printers\u003c\/li\u003e\n\u003cli\u003eIn the box: AMS Hub, 4-pin cable, 2x PTFE tubes (approx. 600mm and 520mm)\u003c\/li\u003e\n\u003cli\u003eRequires printer firmware 01.07.00.00 or later\u003c\/li\u003e\n\u003cli\u003eAMS Lite cannot be mixed with other AMS types through the hub\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e A1, A1 Mini (also A2L)\u003c\/p\u003e\u003cp\u003eBambu Lab part number: SA013\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54687859671324,"sku":"BL-AMS-HUB-A1","price":35.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-ams-hub-a1-series-sa013.png?v=1791870985"},{"product_id":"bambu-lab-hotend-for-p1s-p1p-x1c","title":"Bambu Lab Hotend for P1S, P1P \u0026 X1C (FAH001-N-1 \/ FAH003-N-1 \/ FAH004-N-1 \/ FAH005-N-1)","description":"\u003cp\u003eGenuine Bambu Lab hotend for the P1S, P1P and X1C. Each hotend comes pre-assembled (nozzle, heatbreak and heatsink) so swapping nozzle sizes or replacing a worn hotend is a quick job – no nozzle threading or heatbreak alignment to worry about. Your printer's existing heater and thermistor are reused.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePre-assembled hotend – nozzle, heatbreak and heatsink in one unit\u003c\/li\u003e\n\u003cli\u003eHardened Steel nozzle (0.4 \/ 0.6 \/ 0.8mm) – wear-resistant, required for abrasive and fibre-filled filaments (PLA-CF, PETG-CF, PA-CF etc.)\u003c\/li\u003e\n\u003cli\u003eStainless Steel nozzle (0.2mm) – fine-detail printing with standard filaments\u003c\/li\u003e\n\u003cli\u003eMax printing temperature 320°C\u003c\/li\u003e\n\u003cli\u003eIn the box: hotend, 2x M3-14 step screws, silicone sock, thermal grease, retaining clip\u003c\/li\u003e\n\u003cli\u003eKeep a spare on hand to minimise downtime\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e P1S, P1P, X1C\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e this is the hotend only. The heater, thermistor and fan from your existing hotend are reused. If you need the version with heater and thermistor included, look for the Bambu Lab Complete Hotend.\u003c\/p\u003e\u003cp\u003eBambu Lab part numbers: FAH004-N-1 (0.2mm Stainless), FAH001-N-1 (0.4mm Hardened), FAH005-N-1 (0.6mm Hardened), FAH003-N-1 (0.8mm Hardened)\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"0.2mm \/ Stainless Steel","offer_id":54687862161692,"sku":"BL-HOTEND-P1-SS-0.2","price":25.0,"currency_code":"AUD","in_stock":true},{"title":"0.4mm \/ Hardened Steel","offer_id":54687862194460,"sku":"BL-HOTEND-P1-HS-0.4","price":25.0,"currency_code":"AUD","in_stock":true},{"title":"0.6mm \/ Hardened Steel","offer_id":54687862227228,"sku":"BL-HOTEND-P1-HS-0.6","price":25.0,"currency_code":"AUD","in_stock":true},{"title":"0.8mm \/ Hardened Steel","offer_id":54687862259996,"sku":"BL-HOTEND-P1-HS-0.8","price":25.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-hotend-p1s-stainless-0-2mm.png?v=1791870955"},{"product_id":"bambu-lab-air-filter-for-p2s-x2d","title":"Bambu Lab Air Filter for P2S \u0026 X2D","description":"\u003cp\u003eGenuine Bambu Lab replacement air filter for the P2S and X2D. Activated carbon captures VOCs and odours released during printing – replace the filter periodically to keep air filtration working as intended, especially after printing ABS, ASA or other high-emission materials.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGenuine Bambu Lab replacement part\u003c\/li\u003e\n\u003cli\u003eActivated carbon filtration for VOCs and odours\u003c\/li\u003e\n\u003cli\u003eBambu recommends replacement after roughly 1,440 hours of printing, or sooner if visibly dirty\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e P2S, X2D\u003c\/p\u003e\u003cp\u003eBambu Lab part number: FAZ053\u003c\/p\u003e\u003c!-- INTERNAL: confirm with IBG whether FAZ053 is the External Exhaust Air Filter (P2S\/X2D), the Air Filter - P2S (FAC158) or Air Filter - X2D (FAC213) before publishing --\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54687862292764,"sku":"BL-AIRFILTER-X2D","price":18.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-air-filter-p2s-x2d.png?v=1791870992"},{"product_id":"bambu-lab-hotend-for-a1-a1-mini","title":"Bambu Lab Hotend for A1 \u0026 A1 Mini (FAH018 \/ FAH019 \/ FAH020)","description":"\u003cp\u003eGenuine Bambu Lab quick-swap hotend for the A1 and A1 Mini. The A1 Series hotend clips on and off the heating assembly with no tools, so you can swap nozzle sizes or replace a worn hotend in seconds. Your printer's existing heater and thermistor are reused.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTool-free quick-swap – unclip, swap, clip back in\u003c\/li\u003e\n\u003cli\u003eHardened Steel nozzle (0.4 \/ 0.6mm) – wear-resistant, required for abrasive and fibre-filled filaments\u003c\/li\u003e\n\u003cli\u003eStainless Steel nozzle (0.2mm) – fine-detail printing with standard filaments\u003c\/li\u003e\n\u003cli\u003eMax printing temperature 300°C\u003c\/li\u003e\n\u003cli\u003eKeep a spare on hand to minimise downtime\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e A1, A1 Mini (also fits A2L)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e this is the hotend with nozzle only. The heater and thermistor are part of your printer's Hotend Heating Assembly and are not included.\u003c\/p\u003e\u003cp\u003eBambu Lab part numbers: FAH018 (0.2mm Stainless), FAH019 (0.4mm Hardened), FAH020 (0.6mm Hardened)\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"0.2mm \/ Stainless Steel","offer_id":54687862391068,"sku":"BL-HOTEND-A1-SS-0.2","price":20.0,"currency_code":"AUD","in_stock":true},{"title":"0.4mm \/ Hardened Steel","offer_id":54687862423836,"sku":"BL-HOTEND-A1-HS-0.4","price":20.0,"currency_code":"AUD","in_stock":false},{"title":"0.6mm \/ Hardened Steel","offer_id":54687862456604,"sku":"BL-HOTEND-A1-HS-0.6","price":20.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-hotend-a1-stainless-0-2mm.png?v=1791870964"},{"product_id":"bambu-lab-4-in-1-ptfe-adapter-ii-for-p1-x1-h2-series","title":"Bambu Lab 4-in-1 PTFE Adapter II for P1, X1 \u0026 H2 Series (SA014)","description":"\u003cp\u003eGenuine Bambu Lab 4-in-1 PTFE Adapter II. Connect up to four feeder modules (AMS units or external spools) to one printer inlet, so you can run multiple AMS units or feed AMS-incompatible filaments such as TPU 95A or PET-CF alongside your AMS. The Adapter II adds a replaceable filament cleaning pad that scrubs debris off the filament before it reaches the extruder.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMerges four PTFE tubes into one – up to 7 filaments (1 AMS + 3 external) or multiple AMS units\u003c\/li\u003e\n\u003cli\u003eReplaceable filament cleaning pad at the outlet – catches dust and debris, discharged via the debris outlet\u003c\/li\u003e\n\u003cli\u003eIncludes 5 filament cleaning pads\u003c\/li\u003e\n\u003cli\u003eFit toolhead tube to OUT and AMS\/buffer tubes to IN – reversing the connections can cause blockages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e P1S, P1P, X1C, X1E, H2S, H2D, H2D Pro, H2C. For P2S and X2D use the standard 4-in-1 PTFE Adapter (FAZ013-N).\u003c\/p\u003e\u003cp\u003eBambu Lab part number: SA014\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54687862620444,"sku":"BL-PTFE-ADAPTER-II","price":14.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-4-in-1-ptfe-adapter-ii-sa014.png?v=1791870998"},{"product_id":"bambu-lab-4-in-1-ptfe-adapter-for-p1-p2-x1-x2-series","title":"Bambu Lab 4-in-1 PTFE Adapter for P2S, X2D, P1 \u0026 X1 Series (FAZ013-N)","description":"\u003cp\u003eGenuine Bambu Lab 4-in-1 PTFE Adapter. Connect up to four feeder modules (AMS units or external spools) to one printer inlet, so you can run multiple AMS units or feed AMS-incompatible filaments such as TPU 95A or PET-CF alongside your AMS.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMerges four PTFE tubes into one – up to 7 filaments (1 AMS + 3 external) or multiple AMS units\u003c\/li\u003e\n\u003cli\u003eRequired on the P2S when connecting 3 or more AMS units\u003c\/li\u003e\n\u003cli\u003eRequired on the X2D when running 2 AMS units plus an external spool, or 3 or more AMS units\u003c\/li\u003e\n\u003cli\u003eFit toolhead tube to OUT and AMS\/buffer tubes to IN – reversing the connections can cause blockages\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e P1S, P1P, P2S, X1C, X1E, X2D, A2L\u003c\/p\u003e\u003cp\u003eBambu Lab part number: FAZ013-N\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54687862784284,"sku":"BL-PTFE-ADAPTER","price":9.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-4-in-1-ptfe-adapter-faz013-n.png?v=1791881902"},{"product_id":"bambu-lab-ams-lite","title":"Bambu Lab AMS Lite for A1 \u0026 A1 Mini (SA005)","description":"\u003ch2\u003eBambu Lab AMS Lite – Multi-Colour Printing for the A1 Series\u003c\/h2\u003e\n\u003cp\u003eThe Bambu Lab AMS Lite adds four-colour and multi-material printing to the A1 and A1 Mini. Its open, spring-loaded rotary spool holders accept almost any spool – including cardboard – and the translucent design makes it easy to see what's loaded and to clear a tangle in seconds. If you bought an A1 or A1 Mini without the Combo, this is the upgrade that turns it into a multi-colour printer.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour spools for multi-colour and multi-material printing on the A1 Series\u003c\/li\u003e\n\u003cli\u003eAutomatic filament backup – switches to a second spool of the same filament when one runs out\u003c\/li\u003e\n\u003cli\u003eSpring-loaded rotary spool holders grip the centre hole, so cardboard and odd-sized spools work\u003c\/li\u003e\n\u003cli\u003eRFID filament sync with Bambu spools for automatic profile loading\u003c\/li\u003e\n\u003cli\u003eOpen, translucent design – easy to load, inspect and maintain\u003c\/li\u003e\n\u003cli\u003eHassle-free support removal with dissolvable or break-away support filaments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eSpecifications\u003c\/h4\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCapacity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 spools, 40–68 mm wide, 53–58 mm inner diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSupported filaments\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA, PETG, ASA, PET, PA, PC, dry PVA\/BVOH, PP, POM, HIPS, Bambu PLA-CF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNot recommended \/ unsupported\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePLA Glow, PETG-CF (not recommended); TPE, TPU, wet PVA\/BVOH, PET-CF, PA6-CF, TPU 95A and other CF\/GF (unsupported)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament drying\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eNone (open design)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions \/ weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e397 × 208 × 342 mm, 1.6 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBambu Bus 4-pin cable (included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAMS Lite body and stand\u003c\/li\u003e\n\u003cli\u003e4 × rotary spool holders\u003c\/li\u003e\n\u003cli\u003ePTFE tubes\u003c\/li\u003e\n\u003cli\u003eBambu Bus 4-pin cable\u003c\/li\u003e\n\u003cli\u003eAllen key H2 and 5 × screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA1, A1 Mini and A2L:\u003c\/strong\u003e one AMS Lite per printer (4 colours maximum).\u003c\/li\u003e\n\u003cli\u003eNot compatible with P1, P2, X1, X2 or H2 Series printers.\u003c\/li\u003e\n\u003cli\u003eCannot be used alongside an AMS, AMS 2 Pro or AMS HT on the same A1 Series printer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFAQ\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eCan I run two AMS Lites for 8 colours?\u003c\/strong\u003e\u003cbr\u003eNo – the A1 Series supports a single AMS Lite. For more than four slots, or for filament drying, use an AMS 2 Pro or AMS HT via the AMS Hub – A1 Series (SA013).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it dry filament?\u003c\/strong\u003e\u003cbr\u003eNo. The AMS Lite is an open design with no heating or sealed storage. Keep hygroscopic filaments in a dryer between prints.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWill it fit cardboard spools?\u003c\/strong\u003e\u003cbr\u003eYes – the rotary holders grip the centre hole rather than the spool edges, so paper and cardboard spools work without adapters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAustralian stock, Australian support.\u003c\/strong\u003e Genuine Bambu Lab product shipped from our Melbourne warehouse, with local warranty support from 3D META.\u003c\/p\u003e","brand":"Bambu Lab","offers":[{"title":"Default Title","offer_id":54689837121820,"sku":"BL-AMS-LITE","price":339.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0763\/2263\/6060\/files\/bambu-lab-ams-lite-sa005-angle.png?v=1791885092"}],"url":"https:\/\/www.3dmeta.com.au\/collections\/bambu-lab.oembed","provider":"3D META","version":"1.0","type":"link"}